Irrigation Systems for Your Landscaping
DIY/Crafts

Irrigation Systems for Your Landscaping

If you own a house that has a lawn, the last thing you want is leaving it bare – it does not present a good picture of your home. You want the compound to look as healthy and lush as possible, which adds to its attractiveness. However, you cannot water the lawn once and call it a day – that is where irrigation systems come in.

However, you need to choose the best system for your lawn if you want positive results. After all, different plants have different needs, and you also want your watering efforts to be as effective as possible, minimizing wastage and delivering results. Here are some irrigation systems highlighted below.

Lawn sprinklers

You get the best results from your lawn sprinklers if you use them to water during the early evenings and early mornings. The problem with watering in the middle of the day is that the water evaporates faster, and it tends to scorch the grass. Out of these times, the best time to run the sprinkler though is during the evening hours.

At night, the water has sufficient time to soak down into the roots, and there is the added benefit of less evaporation. If you think you may forget to water, you can set up a timer in the system, so that it makes sure it is running during the best time of day.

While setting up a simple sprinkler system yourself is not a difficult task, you can also call a contractor that is experienced in setting up an in-ground sprinkler system who will place the sprinkler heads where you need them. They can also help in setting up the system so that your property gets the correct amount of water, and ensures the sprinkler heads are out of the way so as not to injure someone.”

Drip irrigation systems

If you have a variety of plants that you must care for, they require different amounts of water, so sprinkler systems will not help much. Many gardeners will, therefore, choose them in this case.

The system allows a landscaper to customize the amount of water their plants get every day and at what times. They operate through porous hoses that give the plant roots water directly. If the landscaper cannot get the hose, they can use old bottles that have small holes in them that deliver water slowly to the roots.

An advantage of this lies in the delivery method. Because the hose or bottle is not exposed directly to sunlight, evaporation is at very low rates. For this reason, you do not need to worry that the sun will scorch the plants during midday hours.

In addition, you can set a drip system on timers, letting you attach some special emitters, which deliver more quantities of water to certain plants. This accuracy will save time and much effort that you could have made – all you need to do is set it and forget it.

 Drip irrigation (uses rain catchment)

This may not be as versatile as the other systems on this list, though it is still a method some gardeners use, while they alternate it with the drip irrigation system. This method uses the force of gravity to deliver water to plants.

The rain barrel will capture the rainwater, and then you can distribute the water once the rain ends. Even though this system cannot be improved by using timers or special emitters, they will definitely save your water bills – particularly during a summer that has some periodic rains.

Just keep in mind that every state has laws regarding the capture of rainwater. If you are considering this option for irrigating your plants and you do not have an irrigation system yet, pay attention to the respective laws of your state.

Bubbler irrigation systems

This is not a familiar system for many, but it is actually quite simple – it is a hybrid of drip and sprinkler systems. The only difference is that bubblers will release higher amounts of water, though they do not do this on ground levels – they do it at almost six inches above the ground. Their design is primarily to water the plants by delivering the water to the roots.

The good news is that you can install timers, and you can also focus their emitters – this will make them direct attention to specific plants that need the water the most.

They are a good option if you have many identical plants within a small area. This also makes them good for raised plant beds, tree, and shrubs.

With all these systems, what are some things you need to consider when you want to install one? We look at the two major ones.

Do you want an automated system?

Many systems these days have an allowance for the attachment of timers, and this will ease the burden of having to remember turning on the timer or switching it off. However, it does not stop there, as newer models have some more advanced characteristics, such as moisture sensors that can immediately sense whether the [plants are lacking moisture, or if it is too much.

Before choosing a system, make sure you decide whether you want these features.

How you want to install them

The figuring out of how you want to install the system will determine the amount of water your plants will get. If you have different plants in your lawn, it is even more important to talk to an expert, and they will advise you on the best method you can choose.

Final thoughts

Always remember that the system you choose must meet all the requirements of your plants and ensure they flourish. In addition, you can also get repair services if the system has inefficiencies, such as landscape irrigation repair Phoenix, and they can advise you on the way forward as well.

Share

Leave a Reply

Your email address will not be published. Required fields are marked *